Products

7.5-8.5% V2O5 Sulfuric Acid Catalysis Used Vanadium Catalyst

Our good quality Sulfuric Acid Catalysis Used Vanadium pentoxide Catalyst is usually contains 5% ~ 10% vanadium pentoxide (V2O5), which is the main component with catalytic activity. In addition to vanadium pentoxide, the catalyst also contains potassium oxide (K2O) or sodium oxide (Na2O) as co-catalyst to increase the activity of vanadium catalyst. Diatomite (mostly silicon dioxide) is used as the carrier to increase the surface area of the catalyst's active component in contact with the gas. Some vanadium catalysts also contain substances such as tin oxide, antimony oxide, iron oxide and alumina

Hot Tags : 7.5-8.5% V2O5 Catalyst Catalyst for Sulfuric Acid Production Yellow Sulfuric Acid Catalyst Vanadium Pentoxide Catalyst Sulfuric Acid Catalysis material BASF Sulfuric Acid Catalyst
View More
99.9%min Sn Tin Ingot CAS7440-31-5

Our High Purity Tin ingots 99.9%min are commercial tin cast into ingots,partially refined,but also containing a small number of different impurities (such as copper,lead,iron,or arsenic). They are solid tin as distinct from tin plates.

Hot Tags : 99.9%min Sn Ingot Tin Ingot for Steelingmaking Tin Ingot for Can Tin Ingot for Welding Tin Ingot 99.9 Tin Metal Ingot
View More
95/99/99.5%min ZnO Calcined Zinc Oxide CAS1314-13-2

Our high purity Calcined Zinc Oxide 95/99/99.5%min ratio is significant, good fluidity, with its production of glaze shrinkage is small, the glaze is not easy to pinhole and crack. The quality standard of calcined zinc oxide is the same as that of grade zinc oxide except for the ratio. After calcined at high temperature, zinc oxide shows light yellow and its melting point is 1975ºC.

Hot Tags : Calcined Zinc Oxide 99.5%min Zinc Oxide for ceramic ZnO Light yellow Powder 1314-13-2 Zinc Oxide Zinc Oxide for coating Calcined Zinc Oxide Powder
View More
16~20% FeReSiMg Ferro Silicon Magnesium Cored Wire 13mm

Our 13mm Ferro Silicon Magnesium Cored Wire 16~20% is a kind of steel-making composite material,made by wrapping deoxidizers and ferro silicon magnesium alloy powders around cold-rolled low-carbon steel strips. The core wire is fed into the molten steel through the feeding line technology. Through the reaction of additives with the molten steel,the morphology of inclusions can be controlled,deoxidation and desulfurization can be achieved,and precise alloying can be carried out. This can increase the alloy yield by 15%-20% and reduce the smelting cost.

Hot Tags : 16~20% FeReSiMg Cored Wire Ferro Silicon Magnesium Cored Wire for cast iron FeReSiMg for steel making 13mm SiMg Wire Ferro Silicon Magnesium Cored Wire Silicon Magnesium cored wire
View More
99/99.5%min TiO2 Electronic Grade Titanium Dioxide CAS13463-67-7

Our high purity Electronic Grade Titanium Dioxide 99/99.5%min is a white amorphous powder, with the main component being titanium dioxide. There are three forms of titanium dioxide found in nature: anatase, rutile, and brookite. Due to its high dielectric constant, titanium dioxide exhibits excellent electrical properties.

Hot Tags : 99.5%min Electronic Grade Titanium Dioxide Titanium Dioxide Powder 99%min TiO2 99% Titanium Dioxide Titanium White Titanium White Powder
View More
Vanadium Pentoxide Catalyst with Cesium

Our good quality Vanadium Pentoxide Catalyst with Cesium is usually contains 6% ~ 9% vanadium pentoxide (V2O5), which is the main component with catalytic activity. In addition to vanadium pentoxide, the catalyst also contains potassium oxide (K2O) or sodium oxide (Na2O) as co-catalyst to increase the activity of vanadium catalyst. Diatomite (mostly silicon dioxide) is used as the carrier to increase the surface area of the catalyst's active component in contact with the gas. Some vanadium catalysts also contain substances such as tin oxide, antimony oxide, iron oxide and alumina

Hot Tags : 6~9% V2O5 Catalyst Catalyst for Sulfuric Acid Production Yellow Sulfuric Acid Catalyst Vanadium Pentoxide Catalyst Caesium Catalyst BASF Sulfuric Acid Catalyst
View More
Vanadium Corrosion Inhibitor

Our good quality Vanadium Corrosion Inhibitor is usually contains 20% ~ 30% Mg, can be divided to three types: Hydroxide, polymer and carboxylic acid. It can efficiently combine with vanadium elements in oilseeds to form magnesium vanadate, which has a good vanadium inhibition effect. At the same time, it still maintains excellent fluidity in water-containing environments or high and low-temperature environments, without decomposition or solidification, and has good stability

Hot Tags : Inhibition for gas turbine generator sets Magnesium polymer Inhibitor Corrosion Inhibitor with Mg Carboxylate Vanadium Inhibitor Vanadium Inhibitor for oil V Corrosion Inhibitor
View More
Vanadium Passivator

Our good quality Vanadium Passivator is catalytic cracking vanadium passivation of FCC (fluid catalytic cracking), for oil refinery. During the catalytic cracking process, especially when using heavy oil as the raw material, the heavy metals present in the raw oil, such as vanadium, will deposit on the catalyst surface, causing catalyst poisoning and deactivation, as well as a decrease in selectivity. This results in a reduction in the yield of light oil, an increase in hydrogen and coke production. To address the vanadium contamination of catalytic cracking catalysts, a passivator can be used to inhibit the toxic effect of vanadium in the raw materials on the catalyst.

Hot Tags : Vanadium Passivator for FCC Oil refinery Passivator inhibit vanadium Fluid Catalytic Cracking Passivator FCC passivation V passivation
View More
99.3~99.8%min NaNo3 Sodium Nitrate 7631-99-4

Our high purity Sodium Nitrate 99.3~99.8%min is an inorganic compound with the chemical formula NaNO3, a hygroscopic, colorless and transparent triangular crystal. Decomposes when heated to 380℃. It is highly soluble in water and liquid ammonia, soluble in methanol and ethanol, slightly soluble in acetone, and slightly soluble in glycerol. When dissolved in water, it absorbs heat, the solution cools down, and the aqueous solution is neutral.

Hot Tags : 99.3%min Sodium Nitrate 99.8%min Sodium Nitrate Sodium Nitrate White Powder Sodium Nitrate With Low Cl Sodium Nitrate Industrial Grade Sodium Nitrate for Agriculture
View More
Mn65Si17 FeSiMn Ferro Silicon Manganese

Our good quality Ferro Silicon Manganese Mn65Si17 is an iron alloy composed of manganese, silicon, iron and a small amount of carbon, etc., is produced in an electric furnace. Its main raw materials are manganese ore, silica, coke, and it is supplemented with fluxes such as lime. This alloy is a commonly used composite deoxidizer in steelmaking and also serves as a reducing agent for the production of low-carbon ferromanganese and metallic manganese. During the steelmaking process, manganese can promote the floating of deoxidation products and enhance the deoxidation effect of silicon and aluminum, while silicon can increase the strength of steel and promote the graphitization of cast iron.

Hot Tags : Mn65% Silicon Manganese Silicon Manganese Lump SiMn Alloy Manganese-Silicon Silicon Manganese Alloy Silicon-manganese
View More
98%min NaHSO4 Sodium Bisulfate 7681-38-1

Our high purity Sodium Bisulfate 98%min is a strong acid's acidic salt. It completely dissociates in water to form a strong acidic solution, which can undergo neutralization reactions with sodium hydroxide to produce sodium sulfate and water, and react with barium chloride to form barium sulfate precipitate. It is mainly used as a fluxing agent for mineral decomposition, a disinfectant, a dyeing aid for acid dyes, and a toilet cleaner, and is also used in the manufacture of sodium aluminate. In 2024, the European Union approved it as a feed additive, belonging to the additive category "process additives" and functional groups "preservatives" and "acid regulators", with application scope covering feed for species other than aquatic animals.

Hot Tags : 98%min NaHSO4 NaHSO4 Powder Sodium Bisulfate CAS7681-38-1 Sodium Bisulfate for cleaning Sodium Bisulfate Industrial Grade 98% Sodium Bisulfate
View More
99.5%min/99.7%min ZnO Indirect Zinc Oxide CAS1314-13-2

Our high purity Indirect Zinc Oxide 99.5%min/99.7%min is a white hexagonal crystal system powder. At room temperature, it is odorless, tasteless and non-sandy. When heated, it turns yellow and returns to its original color upon cooling. Its melting point is 1975℃ and boiling point is 2360℃. It is insoluble in water but soluble in acids, strong alkalis, ammonia water and ammonium salt solutions. It sublimates when heated to 1800℃. It is mainly used in the rubber industry (accounting for 50%), varistors, paints, feed, medicine and other fields.

Hot Tags : Indirect Zinc Oxide 99.7%min Zinc Oxide for rubber ZnO White Powder Indirect Zinc Oxide 99.5%min 995 Indirect Zinc Oxide Indirect Zinc Oxide Powder
View More
99.7%/99.9%min Mn Electrolytic Manganese Flakes CAS7439-96-5

Our High Purity Electrolytic Manganese Flakes 99.7%/99.9%min are refer to the elemental metal obtained by acid leaching of manganese ore to obtain manganese salts and then electrolyzing them in an electrolytic cell. It looks like iron, is irregular in shape, hard and brittle, with one side bright and the other rough, ranging from silvery white to brown. When processed into powder, it turns silvery gray. It is prone to oxidation in the air. When encountering dilute acids, it dissolves and displaces hydrogen. At slightly above room temperature, it can decompose water and release hydrogen gas

Hot Tags : Electrolytic Manganese Metal Flake Manganese Piece Electrolytic Manganese Slice Electrolytic Manganese for steel making Electrolytic Manganese Plate Electrolytic Manganese for smelting
View More

1 2 3 4 5 6 7 8 9

A total of9pages